The gearbox is typically utilised for reduced-velocity and higher-torque transmission equipment. The electrical power of the electric motor, inner combustion motor or other higher-speed operation is reached by means of the equipment of the enter shaft of the reducer meshing with the huge equipment on the output shaft. The ratio of the amount of tooth is the transmission ratio.There four sort gearbox for paper mill,pls verify the comply with informations:
Worm/spiral bevel gearbox reducer
one. Worm/spiral bevel equipment reducer is manufactured in accordance with international technological needs and has a high technological articles.
2. It saves space, is reliable and tough, with substantial overload capacity, and the electrical power can get to much more than 200KW.
3. Reduced energy use, superior efficiency, and the reducer performance is as high as 95%.
four. K spiral bevel gear reducer has lower vibration, minimal sound and higher energy conserving.
5. The spiral bevel equipment reducer is made of large-quality steel material, rigid cast iron box, and the area of the gear is substantial-frequency warmth treated.
6. After precision processing, the reducer that varieties the transmission assembly of helical gears, bevel gears and bevel gears is geared up with a variety of varieties of motors, forming an electromechanical integration, which entirely guarantees the good quality attributes of the geared motor merchandise.
2. Functionality qualities:
1. Vertical output, compact composition, hard tooth floor transmission torque, large-precision gears ensure secure operate, minimal sound and prolonged lifestyle.
two. Installation technique: foot installation, hollow shaft set up, flange installation, torque arm installation, little flange set up.
3. Input mode: motor direct connection, motor belt relationship or input shaft, connection flange input.
four. Output method: hollow shaft output or solid shaft output, the average effectiveness is ninety four%.
five. Combine with R collection to get more substantial velocity ratio.
3. CZPT parameters:
| Pace ratio variety: | simple sort five.36~197.37, K/R mixture type can achieve 32625 |
| Torque range: | 200~50000 Nm |
| Power selection: | .18~200 kW |
CZPTcal equipment hardened equipment reducer
one. R series helical equipment hardened gear reducer is manufactured in accordance with global specialized needs and has a large technological content
2. Challenging tooth area reducer will save place, is reliable and resilient, has higher overload ability, and the energy can reach 132KW
3. Low strength consumption, excellent performance, and the reducer performance is as large as ninety five% or a lot more
4. Reduced vibration, reduced sounds and high vitality conserving
5. The helical gear reducer is created of large-top quality forged metal materials, rigid solid iron box, and the surface area of the equipment is substantial-frequency warmth dealt with
six. Right after precision machining to make sure shaft parallelism and positioning bearing needs, the reducer forming the helical equipment transmission assembly is outfitted with different varieties of motors, mixed into mechatronics, which completely guarantees the top quality characteristics of the geared motor items.
2.Features:
one. Tiny offset output, compact composition, greatest use of cabinet room, the second and 3rd amounts are in the identical cabinet.
2. It adopts integral casting box, which has great structural rigidity, which is straightforward to improve the power of the shaft and the life of the bearing.
3. Set up approach: foot installation, flange installation with big and little flanges, simple to decide on.
4. With strong shaft output, the regular efficiency is ninety six% for the next phase, ninety four% for the third phase, and 85% for the R/R mixture.
five. The RM collection specially designed for mixing can bear more substantial axial and radial forces.
3. CZPT parameters:
| Velocity ratio assortment: | R basic kind three.33~289.seventy four, RX type one.three~8.sixty five, R/R mixed sort can get to 27001 |
| Torque range: | R simple kind 85~18000 Nm, RX type twenty~1680 Nm |
| Power selection: | R basic sort .eighteen~one hundred sixty kW, RX kind .eighteen~132 kW |
Parallel shaft helical equipment reducer
one. The F series parallel shaft helical gear reducer is produced in accordance with intercontinental technological needs and has a substantial technological content material.
two. It saves space, is dependable and tough, has high overload ability, and the electrical power can reach a lot more than 90KW.
three. F parallel shaft helical gear reducer has lower power use, exceptional overall performance and efficiency as substantial as 95%.
4. Parallel shaft helical equipment reducer has low vibration, minimal sound and higher vitality saving. It is produced of high-high quality steel substance, rigid forged iron box, and the surface area of the equipment is substantial-frequency warmth handled.
five. Right after precision machining, the shaft parallelism and positioning accuracy are ensured. All of this constitutes the gear transmission assembly. The reducer is equipped with various motors, forming a mechatronics, which totally assures the high quality attributes of the geared motor items.
2.Attributes:
1. Parallel output, compact structure, large transmission torque, steady procedure, reduced sounds and long life.
two. Set up method: foundation set up, hollow shaft installation, flange installation, torque arm set up, modest flange installation.
three. The rotation route of the enter and output of the simple two-stage is the same, and the 3-stage is reverse an additional session is necessary for F/R mixture.
four. Output mode: hollow shaft output or strong shaft output.
five. Regular efficiency: ninety six% for stage two, ninety four% for degree three, and 85% for F/R blend.
three. CZPT parameters:
| Velocity ratio variety: | fundamental kind three.81~281.71, F/R blend sort can reach 31434 |
| Torque variety: | 200~18000 Nm |
| Power range: | .18~two hundred kW |
CZPTcal gear worm gear reducer
one. The S series helical equipment worm reducer has a large technological material. It has a combination of helical gear and worm gear for built-in transmission, which increases the torque and effectiveness of the machine. This collection of items have total specs, extensive speed assortment, good versatility, adapt to various set up methods, safe and reputable functionality and long existence, and have implemented worldwide requirements.
two. The area of the human body has a heat dissipation effect, powerful vibration absorption, low temperature increase and reduced noise.
three. The device has good sealing performance and strong adaptability to the operating atmosphere.
4. The helical gear worm gear reducer has high transmission precision, which is especially suited for operating in instances with repeated starting. It can be connected to different reducers and outfitted with different sorts of motor drives. It can be mounted in a 90 diploma transmission operation.
situation.
5. The key factors of the S helical equipment reducer are created of extremely put on-resistant resources and have undergone special heat remedy. They have the traits of high machining precision, steady transmission, little measurement, big carrying capacity, and long lifestyle.
6. The helical equipment reducer can be geared up with numerous sorts of motors, forming an electromechanical integration, which completely assures the top quality characteristics of the solution.
two.Features:
one. Mix of helical equipment and worm equipment, compact composition and large reduction ratio.
two. Installation method: foot set up, hollow shaft set up, flange set up, torque arm installation, tiny flange installation.
three. Enter method: motor direct link, motor belt relationship or enter shaft, connection flange input.
4. Regular effectiveness: reduction ratio of seven.5-sixty nine.39 is 77% 70.forty three-288 is sixty two% S/R mix is fifty seven%.
five. Mix with R series to get more substantial velocity ratio.
three. CZPT parameters:
| Speed ratio selection: | simple type 9.96~244.74, S/R blend type can achieve 8608 |
| Torque range: | forty three~4200 Nm |
| Energy variety: | .eighteen~22 kW |
Packing
Speak to us to have much more details about “CZPT “
