ZD ninety four%~97% Performance Higher CZPT and CZPTx Gear Spherical 90mm AE Collection Planetary CZPT
Merchandise Description
AE Series Planetary CZPT moreover provides entrance and rear oil seals, utilizes the output shaft double help construction and design of helix equipment, which makes the gear meshing smoother and stable, the AE Series can be utilised in different control transmission fields with servo motors. The backlash of the AE series is considerably less than 5 arc.min and the reduction ratio handles three~a hundred.
The Product Advantages of Planetary CZPT:
1.Flexible framework design and style, in line with numerous doing work problems.
2.Ring equipment processing technological innovation: Utilizing interior equipment slotting device and hobbling equipment the precision of ring equipment soon after processing can attain GB7.
3.Hardened gear secondary scraping technologies: secondary large-velocity dry reducing of equipment gets rid of gear deformation triggered by warmth treatment. Gear precision can attain GB6.
four.CZPT backlash testing.
How To Read
90 AE 10 ( ) (S) – 40 T1
a b c d e f g
a | Frame Size | 90=90mm |
b | Series code: AE | Round mounting flange series |
c | Reduction Ratio | One Phase: 3,4,5,six,seven,eight,9,ten Two Stages: fifteen,twenty,25,thirty,35,forty,45,fifty,60,70,eighty,ninety,100 |
d | Backlash | Single Phase: ≤5arc.min Two Phases: ≤8arc.min |
e | Input shaft variety | S: Overall locking (Omitted) (Regardless of whether the motor has a keyway) S1: Locking with locking ring (Irrespective no matter whether the motor has a keyway ) S2: Locking with keyway (Input shaft with essential) K: With keyway A: Other sorts (You should get in touch with with us) |
f | Relevant servo motor electricity (W),Remember to make contact with us for distinct electrical power | |
g | Remember to make contact with us for the mounting variety of the flange |
Spesifications & Particulars
Solution Variety | Unit | Number Of Stage | Reduction Ratio | 90AE |
Rated Output Torque | N.M | 1 | 3 | eighty five |
four | ninety five | |||
five | 105 | |||
7 | ninety three | |||
eight | 83 | |||
10 | 70 | |||
2 | 12 | 115 | ||
15 | a hundred and fifteen | |||
16 | a hundred thirty | |||
20 | 130 | |||
twenty five | one hundred thirty five | |||
32 | a hundred and twenty | |||
35 | 125 | |||
forty | one hundred fifteen | |||
50 | 135 | |||
sixty four | eighty three | |||
80 | eighty three | |||
100 | seventy three | |||
Max. radial power* | N | one,two | three~a hundred | 2100 |
Max. axial power* | 1,2 | three~a hundred | 1050 | |
Complete Load Efficiency | % | 1 | three~10 | ≥97% |
2 | 15~one hundred | ≥94% | ||
Backlash | arc.min | 1 | 3~10 | ≤5 |
2 | 15~one hundred | ≤8 |
*Maximum radial drive and highest axial force, when the output is 100rpm, it acts on the middle position (L/2) of the output shaft.
Dimensions (mm):
Product type | No. of stage | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | L9 | L10 | D1 | D2 |
90AE | 1 | 151 | 33.seven | seventy seven.three | forty | 36 | 28 | 4 | 3 | 40 | ten | Φ90 | Φ70G7 |
two | 165.5 | ninety one.8 | |||||||||||
No. of phase | D3 | D4 | D5 | D6 | D7 | D8 | B1 | H1 | G1 | G2 | G3 | Q3 | |
1,2 | ≤19G7 | Φ20h7 | Φ30 | Φ60h7 | Φ90 | Φ70 | 6 | 22.5 | M5×12 | M6×12 | M6×18 | eighty |
Particulars of AE series Planetary CZPT
System
Compact output shaft system
It adopts the layout of output shaft built-in system, compact framework, large rigidity, and it can endure large affect. Area the enter coupling and the sunlight equipment at the centre of the output shaft to increase the concentricity of the elements, thus effectively managing the gear clearance and improving the backlash of the entire gearbox.
Framework
Full needle framework
The interior bearing of the planetary equipment adopts a entire-needle layout, the interior gap is created by a grinding procedure, the surface hardness is HRC60, and the cylindricity is much less than .003mm.
In contrast with AF Series
AF series planetary gearbox utilizes square via hole flange, but AE sequence makes use of spherical threaded flange.
For other requirements, AE sequence planetary gearbox is similar with AF collection.
Other Product Kinds of AE collection Planetary CZPT
More products,please simply click listed here…
Assembly Process
Please adhere to the guidelines bellow to assemble the servo motor and reducer. Other than for specified items, there are different proportions of servo motors, some motors could not be able to connect with flanges.Therefore, be certain to use the correct motor which is specified when location your buy.
In Scenario Of Assembling A Motor Without Crucial
1.Just take off the rubber cap, turn the enter shaft, and match the head of the bolt to the gap of the rubber cap. Make sure that the correcting bolt is loosened.
2.Gradually put the motor shaft into the enter shaft (Ensure that it is efficiently put in CZPT jam.). Be cautious not to be inserted with the motor tilted.
three.Connect the motor to the reducer and fasten the bolt with specified fastening torque. See Desk 1.
4.CZPTen the fixing bolt of the input shaft with specified fastening torque wrench, and so on. See Desk two.
five.Place on the rubber cap.
Desk 1
Motor Combination Bolt | CZPTening Torque | |
(N·m) | (kgf·cm) | |
M3 | one. | 10 |
M4 | 3. | thirty |
M5 | five.8 | 60 |
M6 | nine.8 | one hundred |
M8 | 19.6 | two hundred |
M10 | 39.2 | four hundred |
M12 | sixty eight.six | seven hundred |
M16 | 168 | 1650 |
Desk 2
Combination Bolt | CZPTening Torque | |
(N·m) | (kgf·cm) | |
M3 | 1.five | 15 |
M4 | 3.five | 35 |
M5 | seven.one | 71 |
M6 | 12 | one hundred twenty |
M8 | thirty | three hundred |
M10 | 60 | 612 |
Organization Profile
Shipping
Our Companies
1.Upkeep time & Guarantee: 1 yr right after leaving manufacturing facility
two.Other service: Including modeling variety manual, set up guide, and difficulty taking pictures manual, etc.
FAQ
Q: What’re your main items?
A: We at the moment create Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Large CZPT Planetary CZPT and CZPT Cycloidal CZPT etc.. You can verify the specifications for previously mentioned motors on our website and you can e-mail us to suggest necessary motors per your specification as well.
Q: How to choose a appropriate motor or gearbox?
A:If you have motor images or drawings to show us, or you have detailed requirements, these kinds of as, voltage, speed, torque, motor dimension, operating manner of the motor, needed life time and noise degree and so on, make sure you do not hesitate to let us know, then we can advocate suited motor for every your ask for appropriately.
Q: Do you have a CZPT provider for your normal motors or gearboxes?
A: Of course, we can customize for every your request for the voltage, speed, torque and shaft dimensions/form. If you need further wires/cables soldered on the terminal or need to have to incorporate connectors, or capacitors or EMC we can make it also.
Q: Do you have an personal layout services for motors?
A: Sure, we would like to design motors independently for our buyers, but some type of molds are necessory to be developped which might need to have actual expense and design and style charging.
Q: What’s your lead time?
A: CZPTly speaking, our typical standard merchandise will need to have fifteen-30days, a little bit more time for CZPT items. But we are really adaptable on the direct time, it will count on the particular orders.