ZD Agricultural CZPT Large CZPT 98mm ZDR Sequence Planetary CZPT
Item Description
ZDR sequence planetary gearbox has adopted helical equipment layout, so the meshing of gears can be smoother. This sequence has a double-supported and sealed composition, less difficult to put in for clients. It is broadly employed in linear manipulators, packaging machinery, assembly lines and etc. The highest backlash of the ZDR sequence is less than five arc.min and the reduction ratio handles 3~81.
The Product Advantages of Planetary CZPT:
one.Versatile structure style, in line with numerous functioning problems.
2.Ring gear processing engineering: Utilizing internal gear slotting equipment and hobbing machine the precision of ring equipment following processing can get to GB7.
3.Hardened equipment secondary scraping technology: secondary substantial-velocity dry chopping of gear removes equipment deformation brought on by heat remedy. Equipment precision can attain GB6.
4.CZPT backlash screening.
How to Study:
98 ZDR 20 ( ) (S) – 750 T1 ( )
a b c d e f g h
a | Frame Size | ninety eight =98mm |
b | Series code:ZDR | Indirect tooth precision |
c | Reduction Ratio | Single Stage: three,4,five,6,7,eight,nine,10 Two Stages: fifteen,20,25,35,45,eighty one. |
d | Backlash | Single Phase: 8arc.min Two Stages: 12arc.min |
e | Input shaft variety | S:All round locking(Omission)(irrespective regardless of whether the motor with keyway can use it. But D Minimize cannot use) S1:Locking with locking ring(no matter no matter whether the motor with keyway can use it. But D Lower can’t use) S2:Locking with keyway (input shaft with crucial) K:With keyway A:0ther kind (please speak to with us) |
f | Applicable servo motor electrical power (W),Remember to speak to us for particular electricity | |
g | Please make contact with us for the mouting variety of the flang | |
h | Make sure you get in touch with us for the product of servo motor |
Spesifications & Particulars
When enter velocity is 3000rpm
Item NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Inner Minute Ohnertia Of Input Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
98ZDR | 3 | 1000 | a thousand | seven.fifty five | 22.8 | 882 | 441 | 2.43 | eighteen.3 | 54.9 |
1500 | 12.3 | 37.one | ||||||||
2000 | 17.2 | fifty one.5 | ||||||||
5 | one thousand | 600 | 13.four | forty.5 | 1080 | 539 | 1.85 | 23.five | 70.six | |
1500 | 21.five | sixty four.four | ||||||||
nine | 750 | 333 | 18.two | fifty four.seven | 1470 | 735 | .650 | eighteen.2 | fifty four.7 |
Note1) The moment of input shaft conversion is only obtained from the reducer, so it does not include instant of inertia of the motor.
Note2) The max. input pace is 5000rpm. Usually set to 3000rpm or significantly less.
Note3) The permissble radial load is indicated on the middle of the output shaft.
Note4) All values are inside of the variety corresponding to helical gear.
When enter velocity is 3000rpm
Solution NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Moment Ohnertia Of Enter Shaftconversion (x10-four kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
98ZDR | fifteen | 750 | 200 | 30.four | 91.two | 1760 | 882 | .seven-hundred | 30.4 | ninety one.two |
20 | 750 | one hundred fifty | forty.six | 122 | 1910 | 955 | .690 | 40.6 | 122 | |
twenty five | 750 | one hundred twenty | 50.7 | 152 | 2060 | 1030 | .680 | 50.7 | 152 | |
35 | 400 | 85 | 37. | 111 | 2060 | 1030 | .269 | 37. | 111 | |
45 | two hundred | sixty six | 21.one | sixty three.5 | 2060 | 1030 | .5716 | 28.three | eighty five.2 | |
81 | 100 | 37 | fourteen. | forty two. | 2060 | 1030 | .030 | 17.8 | fifty three.five |
Note1) The minute of enter shaft conversion is only acquired from the reducer, so it does not contain instant of inertia of the motor.
Note2) The max, input velocity is 5000rpm. Generally set to 3000rpm or considerably less.
Note3) The permissble radial load is indicated on the centre of the output shaft.
Note4) All values are in the assortment corresponding to helical equipment.
When enter velocity is 2000rpm
Merchandise NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Interior Moment Ohnertia Of Enter Shaftconversion (x10-four kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
98ZDR | 3 | 750 | 666 | eight.seventy three | 26.two | 1571 | 505 | 2.forty three | 18.3 | fifty four.9 |
1000 | twelve.3 | 37.1 | ||||||||
1500 | 18.three | fifty four.nine | ||||||||
five | 750 | four hundred | fifteen.five | forty six.5 | 1230 | 615 | 1.85 | 23.five | 70.six | |
1000 | 21.5 | 64.four | ||||||||
nine | four hundred | 222 | 14. | 41.9 | 1680 | 840 | .650 | eighteen.two | fifty four.7 | |
fifteen | four hundred | 133 | 23.3 | 69.8 | 2571 | 1571 | .700 | 30.4 | ninety one.2 | |
20 | four hundred | 100 | 31. | ninety three.one | 2180 | 1090 | .294 | 40.six | 122 | |
twenty five | four hundred | eighty. | 38.eight | 116 | 2060 | 1030 | .680 | 50.seven | 152 | |
35 | two hundred | 57. | 22. | sixty six. | 2340 | 1170 | .269 | 37. | 111 | |
forty five | a hundred | 44.four | 14. | forty two.1 | 2060 | 1030 | .5715 | 28.3 | 85.2 | |
two hundred | 28.three | eighty five.2 | ||||||||
eighty one | 100 | 24.6 | 17.eight | 53.five | 2060 | 1030 | .0300 | 17.8 | fifty three.five |
Note1) The second of enter shaft conversion is only gained from the reducer, so it does not consist of instant of inertia of the motor.
Note2) The permissble radial load is indicated on the middle of the output shaft.
Note3) All values are within the variety corresponding to helical equipment.
Dimensions (Device: mm):
Merchandise NO. | Reduction Ratio | Motor | Whole Size L | Output Shaft | Flange | |||||||||||||
CZPT- created MSMA |
Yaskawa-created SGMASH SGMSH | Mitsubishi-produced HC-KFS HC-RFS |
LR | S | Q | QM | QM | W×U | T | D | LB | LE | LA | LZ | X | |||
98ZDR | 81 | a hundred | 158 | sixty one | 24 | 40 | 35 | M6(depth)twenty | 8×27 | 7 | 100 | 90 | five | a hundred and fifteen | M8 | 20 | ||
forty five | 200 | a hundred sixty five | ||||||||||||||||
35 | four hundred | |||||||||||||||||
9 | 750 | 158.5 | ||||||||||||||||
fifteen,twenty,twenty five | 750 | 171 | ||||||||||||||||
3,five | a thousand | 177 | ||||||||||||||||
three,5 | 1500 | |||||||||||||||||
three | 2000 |
Note1) You should inquire to us if motor design is not standard (Matching motor list). (The flange dimension may be diverse if motor assension is various.)
Note2) Rotation of the output shaft is in the same route as that of motor input.
Note3) All values are inside of the assortment corresponding to helical equipment.
System
CZPT assistance mechanism
one.The planetary equipment is positioned in the middle of the output shaft.
2.The output shaft bearing is put at the two finishes of the planetary equipment.
three.Independent sunshine gear and coupling.
Compact output shaft mechanism
It adopts the design of output shaft integrated technique, compact construction, substantial rigidity, and it can face up to huge influence. Place the input coupling and the solar equipment at the heart of the output shaft to increase the concentricity of the elements, thus successfully controlling the gear clearance and improving the backlash of the total gearbox.
Composition
Total needle structure
The inner bearing of the planetary gear adopts a complete-needle style, the inner hole is manufactured by a grinding process, the area hardness is HRC60, and the cylindricity is much less than .003mm.
Ring gear construction
The integral framework of the ring equipment and the output flange improves its rigidity and lowers misassembly.
Other Model Kind of ZDR Collection
Much more goods,you should click on here…
Firm Profile
Delivery
Our Providers
1.Maintenance time & Warranty: 1 calendar year following leaving factory.
2.Other provider: Including modeling selection information, set up guidebook, and problem capturing information, etc.
FAQ
Q: What’re your major goods?
A: We presently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT and so on.. You can check out the specifications for above motors on our site and you can email us to advocate necessary motors for every your specification too.
Q: How to select a suited motor or gearbox?
A:If you have motor images or drawings to show us, or you have thorough specifications, these kinds of as, voltage, pace, torque, motor size, operating manner of the motor, essential lifetime and sound level and many others, make sure you do not hesitate to permit us know, then we can advocate ideal motor per your request accordingly.
Q: Do you have a CZPT services for your standard motors or gearboxes?
A: Sure, we can personalize per your ask for for the voltage, velocity, torque and shaft dimension/condition. If you need additional wires/cables soldered on the terminal or want to insert connectors, or capacitors or EMC we can make it way too.
Q: Do you have an personal design service for motors?
A: Sure, we would like to style motors independently for our clients, but some variety of molds are necessory to be developped which may possibly need to have exact value and design charging.
Q: What is actually your lead time?
A: CZPTly talking, our typical normal product will want 15-30days, a little bit longer for CZPT merchandise. But we are quite flexible on the direct time, it will depend on the distinct orders.